Often, the owners of a country house discover the destruction of brickwork. Basically, this is due to the dishonesty of the builders or non-compliance with the technology of construction work, in a situation where the construction was carried out on their own. If, for example, 3-4 bricks fell out of the wall, then it will be enough to simply install them in place or, in case of their destruction, replace them with new ones. A bearing brick wall that has fallen into disrepair is pre-strengthened with special props, and then proceeds to restoration work, after consulting with a professional.
Do you want to buy yourself a cheaper duct fan coil unit, but do not know where? We advise you to visit our website and purchase a channel fan coil unit from us.
The work begins with the fact that along the entire perimeter of the disturbed masonry, an incision is made in the seam and damaged brick. This is done with a special drill attachment. If the brick is held firmly enough, then parts of it are knocked out with a hammer and chisel. After the entire section of the wall is freed from brick and cement mortar, you need to clean the surface of debris and dust with a metal brush. Next, having prepared the cement mortar, they begin to lay out the bricks. The mortar is first applied to the brick itself, and then to the walls of the masonry gap. The thickness of the grout should not be more than 2 centimeters. A brick applied in the right place is installed by tapping the trowel handle on the edge of the brick. It is necessary to ensure that the new brick is flush with the brick wall. The final moment is the jointing of inter-brick joints..
