Wood painting
Before painting wooden products, it is recommended to pre-prepare the surface to be treated. Previously painted wood is cleaned of old paint, but if the layer is strong, you can leave it, but the compatibility of the existing and new coatings should be determined.
Do you want to build a new house, but do not know where to buy cheaper concrete? We advise you to buy new Moscow concrete on this site at a reasonable price.
The area to be painted is ground, cleaned and primed. Cracks and fallen out knots are covered with putty, re-grinded and cleaned. Before applying the enamel and varnish, the wood must be dried well, because after applying the material to damp surfaces, defects are formed in the form of peeling and bubbles.
An alcohol-based stain is applied to damp wood. Powder stains are diluted in heated water and filtered through a fine sieve. The rich color of the coating is obtained as a result of applying 2 — 3 layers, each must be given time to dry completely.
The first layer of paints and varnishes is applied along the grain with uniform movements. The work is performed with a swab or a soft brush; a spray gun is well suited for applying enamels and impregnations. Until the treated surface is completely dry, it is recommended to avoid drafts in the room; outdoor work is best done on a calm day..
