Start gluing wallpaper from the window. You need to stand in front of the window and choose a corner. Start gluing from it. And so on to the door. Then again you need to go back to the window, and from another window you will stick towards the door. You need to glue the wallpaper together. One person will work against the wall and above, while the other will be able to do the work below and will spread the wallpaper. Apply glue to the walls to the width of the wallpaper strip. You can even make it a little wider. Apply the oiled strip of wallpaper to the wall. Press the wallpaper against the wall with a clean cloth. Then slide down. Try not to leave voids, air bubbles under the wallpaper. Excess glue must be kicked out onto its side. Wipe it gently with a cloth so that it does not get on the wallpaper. The bottom wallpaper can be cut off with a blade after drying.
Do you want to know more about the production of corrugated board, but do not know where? We advise you to visit our website and find out all the information you are interested in about the production of corrugated board.
Before gluing the wallpaper near switches or sockets, unscrew the switches and first de-energize the room. Close the holes in the wall with a nylon cover. You can also use a sheet of plastic for this purpose. Make a cruciform cut with a blade in the wallpaper after it is glued to the area. Then unscrew the edges and cut them off with scissors. You will receive the hole for the outlet. You can cut diagonally.
