The first laminate board is placed in a corner, then the next one is attached to it, inserting the fasteners into the puzzle at an angle of 30 degrees, the panel is directed to the floor and then snaps into place. In this way, the entire first row is collected. For strength, the next row begins with a laminate board cut in half or from the last board cut with the remainder of the previous row. In this way, the second row is assembled, after which it is joined to the first. In order to prevent chips, you should not click and lift a whole row, this is done very carefully. Docking the rows is very simple, they are snapped to each other, slightly raising the assembled row, insert it into the previous puzzles and lower it to the bottom.
Looking for a profitable mortgage? We recommend you a mortgage in mkb on favorable terms. By clicking on the link you can familiarize yourself with the details of the offer.
The main challenge is to properly cut planks that run into obstacles such as thresholds, pipes or any other similar object. The curly cut is adjusted by hand with a hacksaw, while especially difficult areas are processed with a grinder or file. Then they make accurate measurements and calculations, or use paper stencils, adjusted in place, then transfer a pattern of unevenness to the laminate board. If scratches or chips form on the planks during work, do not use them, as they are set aside for cutting..
