Before proceeding with the installation of the carpet, it is necessary to check the base for evenness. If the level difference is more than 4-5 mm, the carpet will «creep» over time, even if it was fixed. If protrusions or indentations are observed, the floor must be leveled. The leveling method depends on the base material. On a wooden base, you should walk with a scraping.
Coating preparation consists in keeping the carpet indoors for three days. The roll should warm up and acquire room humidity. You will need a hard-coated roller to roll out the coating. A paint roller should not be used, as particles of roller material can leave streaks on the carpet that will be difficult to get rid of. The coating is cut with a knife.
To fix the carpet, you first need to dismantle the skirting boards. The material is laid on the base and the material is wrapped on the walls. The carpet is smoothed with a roller and cut off. The edges need to be folded and the skirting boards installed. The holes from the fasteners are filled with liquid nails..
You can also take double-sided tape to fix the coating. It is glued around the perimeter and in the center of the room. After laying the carpet, it is leveled. Then half of the material is wrapped and the protective tape is removed. Perform similar actions with the other part..
Many people in our country today own their own homes. On this site, they are invited to repair the roof of a private house, which is carried out by highly qualified specialists at a relatively inexpensive and fairly short time frame. The roof is the most important part of the structure!
