When applying the putty to the walls, which will later be covered with wallpaper, you must try to hold the spatula at an angle of 25-30 degrees. This is best done diagonally..
As a result, the material will be evenly distributed in the vertical and horizontal directions. In addition, the putty mixture must be applied from the side of the surface that has not yet been finished and pulled to the putty surface. As a result, the material will overlap.
After finishing finishing the entire surface, it is worth waiting for it to dry out, which takes at least 12-14 hours. After that, the surface should be treated with fine sandpaper. Then it is worthwhile to apply a primer on it again, and after the last has dried, lay a putty layer. Its thickness should not be large, since with its help the walls are completely aligned. After the putty dries, you can start pasting the wallpaper..
The process of preparing walls for painting is almost the same as in the case of wallpapering. Although there is a slight difference, since the surfaces in this case must be made smooth and even. Hence the number of putty layers applied. As a rule, it is not 2-3 layers, but more, since in order to achieve the desired result, a repeated approach to the wall will be required. But the thickness of the layers should then be small.
Parquet occupies the leading position in the flooring market. There are many materials used to make parquet flooring, for example American Walnut — a quality, durable finish. And the price of American Walnut solid wood will pleasantly surprise you.
